View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0006298 | ardour | features | public | 2015-05-03 22:06 | 2015-12-14 14:58 |
| Reporter | ovenwerks | Assigned To | |||
| Priority | normal | Severity | minor | Reproducibility | have not tried |
| Status | closed | Resolution | no change required | ||
| Product Version | 4.0 | ||||
| Summary | 0006298: For control surfaces: make record enable button trigger "Aux" button on buss strips | ||||
| Description | Buss strips in the mixer view have no record enable option, so the record enable has no effect. It could be used instead to trigger the "aux" button so that the channel faders could be used to adjust the aux levels. The channels that actually have an Aux that feeds the selected strip could have the select lamp flash. (select lamp is visible on the bcf2000 with no shift) | ||||
| Tags | control, surfaces | ||||
|
|
This has been fixed by adding sends to the vpot assignment instead. Because of the HW it may not be obvious to the user if a fader is now send instead of gain after switching banks. The GUI visibly changes the whole strip colour, but the surface can't do that. |
| Date Modified | Username | Field | Change |
|---|---|---|---|
| 2015-05-03 22:06 | ovenwerks | New Issue | |
| 2015-05-04 04:37 | ovenwerks | Tag Attached: control | |
| 2015-05-04 04:37 | ovenwerks | Tag Attached: surfaces | |
| 2015-12-14 14:58 | ovenwerks | Note Added: 0017724 | |
| 2015-12-14 14:58 | ovenwerks | Status | new => closed |
| 2015-12-14 14:58 | ovenwerks | Resolution | open => no change required |
